Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the
fault is not listed in the SYMPTOM column, disconnect the power cord and contact your dealer or service center for help.
The amplifier fails to turn on when the
@ Power cord is not plugged in or is not completely inserted.
@ Firmly plug in the power cord.
POWER switch is pressed.
No sound.
@ Incorrect output cord connections.
® Connect cord properly. If the problem persists, the cables
may be defective.
-
les
® Incorrect amplifier operation.
@ Set the amplifier controls to the correct input selection.
Sound "hums".
| ® incorrect cable connections.
@ Firmly connect the audio plugs. If the problem persists,
the cord may be defective.
No picture.
@ Incorrect cord connections.
® Connect the video plugs correctly.
@ Select correct video unit.
® Turn video unit on.
@ Wrong video unit selected.
@ Video unit not turned on.
4
Werbung
