Werbung
Verfügbare Sprachen
Verfügbare Sprachen
m@ TO LISTEN TO PROGRAM SOURCE
=
Press the POWER switch.
2. Select the program source to be heard with the INPUT
selector or TAPE MONITOR button.
To listen to the program source selected with the
INPUT selector, press the TAPE MONITOR button so
that the TAPE MONITOR indicator goes off.
To listen to the tape program (when the TAPE
MONITOR indicator lights), select the tape deck to be
heard with the TAPE switch.
. Play the program source.
4. Adjust the VOLUME and TONE controls.
For details of the surround mode, refer to "USING THE
SURROUND
PROCESSOR".
ao
Mm TO RECORD PROGRAM SOURCE
Press the POWER switch.
2. Select the program source to be recorded with the
INPUT selector.
3. Select the tape deck or video cassette recorder to be
used for recording with the REC OUT selector.
4. To monitor the sound fed to tape deck (in case of 3-
head cassette deck, just recorded sound), press the
TAPE MONITOR button so that the indicator lights and
set the TAPE switch to corresponding position.
5. Play the program source to be record and set the tape
deck or video cassette recorder to record mode.
The settings of the SURROUND MODE selector, TONE
controls, VOLUME control and SUPER BASS switch do not
affect the recérding.
=e
@ TO DUB TAPES
1. Press the POWER switch.
2. Set the REC OUT selector to the desired tape copy
mode.
3. Set the tape decks or video cassette recorders to play
and record mode respectively.
4. To listen to other program source during dubbing,
select the program source to be listened to with the
INPUT selector.
The settings of the SURROUND MODE selector, TONE
controls, VOLUME control and SUPER BASS switch do not
affect the dubbing.
The AV-M77 incorporates a sophisticated, multi-mode
surround processing circuitry which allows you to expand
the audio sound field for a theater-like experience in the
listening/ viewing room.
@ The surround processor in the AV-M77 is effective only
when the AV-M77 is used in a 4-speaker system setup.
™ REAR SPEAKER PLACEMENT
(See Fig. Fe.)
The placement of a rear speaker pair in the listening room
will greatly affect the overall sound field created. A small
pair of speakers is all that is really required to create the
full effect, and the most basic speaker placement
configuration is the one shown in Fig. A. This setup is ideal
for creating a theater-like atmosphere for movies and
other video programs.
The "B" setup creates a sound field with added depth,
much like that expendenced in a live concert hall, where
all the sound is coming at you from the front. It is most
appropriate for musical sources, rather than videos.
The "C"" speaker placement configuration effectively
"widens" the sound field, and is suitable for movies and
other video programs.
_
While the most basic speaker placement setup is
recommended at first, by experimenting with different
speaker placements for each musical or video source, and
with each surround sound mode, you will be able to create
a wide variety of sound field effects suited fo your listening
environment, and to your own particular tastes.
@ NATURAL SURROUND
The Natural Surround is an exclusive Yamaha surround
processing mode which is effective with all music and
video sources. It creates a natural, lifelike surround effect
without the use of delay circuitry, adding considerable
depth and imaging to all audio sources. It is recommended
for both music listening and for viewing stereo video
SOUICeS.
,
NOTE
If a monaural sound source is used in the Natural
Surround mode, no sound will be heard from the rear
speakers.
@ SIMULATED SURROUND
The Simulated Surround mode is also intended for
monaural audio sources, such as video and TV programs,
it creates a surround sound effect, and employs a delay
circuit for an extra dimension of depth and imaging.
Mm OPERATION
1. Play the program source.
2. Press the REAR SPEAKERS selector.
3. Select the surround mode with the SURROUND MODE
selector.
4. Adjust the REAR LEVEL control.
5. Use the VOLUME control to adjust the whole sound
level.
Werbung
