Unpacking - THORENS TD 309 Bedienungsanleitung

Unpacking

Carefully remove the turntable and all accessories from
the box. Check that the following items are included:
1 x base with sub-platter and tonearm
1 x Thorens drive belt
1 x guide sleeve
1 x platter
1 x felt mat
1 x balance weight
1 x tonearm counterweight
1 x plug-in power supply and power cable
1 x RCA phono cable
1 x earth wire
1 x adapter for 7-inch records
1 x stylus balance
1 x spirit level
Please keep the packaging for future transport.
Always replace the transit screws before re-packing
and shipping.
The three transit screws inside the sub-chassis feet
need to be removed before the turntable can be set up.
➔ Fig. 1
The suspension in each sub-chassis foot is factory-
adjusted and will not need to be readjusted unless the
weight of the turntable is altered (e.g. through the use of
stabilisers or heavy platter mats).
Fig. 1
➔ Page 27
23