Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Timer stand-by operation
For details, consult
the instruction
manuals
of an
audio timer.
_M@Timer recording of radio
broadcasts
Tune in the station to be recorded before timer setting.
1 Set up the cassette deck ready for recording.
Refer to page 22.
2 Set the audio timer.
3 Set the TIMER switch to REC.
REC
OFF
PLAY
© TIMER
«
@ The power of the system is turned ON when the timer ON
time comes, and recording will start.
Notes:
Audio timer
a: > [CeO O
} — = " 4 F To AC outlet
Timer playback
1 Set up the cassette deck ready for playback.
Refer to page 18.
2 Set the audio timer.
3 Set the TIMER switch to PLAY.
REC
OFF
PLAY
© TIMER
=>
@ The power of the system is turned ON when the timer ON
time comes, and playback will start.
@ If tapes are loaded into both decks A and B, timer playback
will begin with Deck B.
1.To ensure that the cassette deck's automatic shut-off switch operates before the power is shut off, set the timer so that it operates for
a little longer than the playing time of the tape.
2.Do not use a timer for the dubbing procedure.
3.When
operating the unit other than the CD player using an audio timer, be sure to remove the disc from the CD player.
@ Arranging the speakers
A variety of rear (SURROUND) speaker arrangement patterns are
possible according to room size, reverberation characteristics, etc.
The arrangement pattern given here is typical example for effective
surround sound. The given example is only suggestion. Arrange the
speakers according to your individual taste.
Standard arrangement
(Front)
(Front)
O
,
a
a
!
as
.
as
= a i
(Rear)
KRX-69
(En)
27
Werbung
