Kenwood KRX-69 Bedienungsanleitung Seite 52

DPSS operation
The DPSS stands for Direct Program Search System, which enables the following convenient operations (these
operations are, however, not available on both decks simultaneously). The DPSS functions are based on the
detection of non-recorded spaces of 4 seconds or more between tunes.
1. Skip play : By specifying a tune located several tunes beyond (or behind) the tune being
played, skips tunes between the current tune and the desired tune and starts
playback from the beginning of the selected tune. Up to 16 tunes can be
skipped in Skip Search.
2. Single-tune repeated playback : One single tune is played back repeatedly up to 16 times.
3. Rewind & Play : Rewinds the tape to the beginning and starts playback from there.
4. Dash & Play : Ifanon-recorded space of more than 10 seconds is detected during playback,
that space will be skipped by fast tape winding.
Tune being played
Space (non-recorded) by Space (non-recorded)
Head
tape transport direction >
Skip play operation
The following four examples show the cases when tape runs in the direction of ». When tape runs in the direction
of <, press the opposite key.
To play the tune being played from the
To play a tune located immediately after the tune
beginning being played
Press once. Press once.
To play the tune located 4 tunes behind
Press 4 times. Press 5 times.
The DPSS will not function properly with the following types of tapes.
@ Tapes containing spaces of 4 seconds or more, such as conversations and speeches.
Tapes containing extremely low levels or non-recorded blanks in the middle of tunes, such as classical music.
Tapes containing recording or large noise between tunes.
Tapes containing spaces of less than 4 seconds between tunes.
e
e
e
@ Tapes recorded with low recording level.
20) kRX-69 (En)