Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A\Caution: Read this page carefully to ensure safe operation.
Before applying power
For the U.S.A. and Canada
For Australia and Europe
Important!
Units shipped to the U.S.A. and Canada are designed for opera-
tion on 120 volts AC only.
Safety precaution for a Polarized AC plug
However, some products may be supplied with a non-polarized
plug.
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE
THIS
(POLARIZED)
PLUG
WITH
AN
EXTENSION
CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
Important!
Units shipped to Australia are designed for operation on 240 V
AC only.
Units shipped to Europe are designed for operation on 220 V
AC only.
For other countries
For the United Kingdom
Important!
Units shipped
to the U.K.
are designed for operation
on
240 volts AC only.
The mains plug must be removed from the wall socket prior
to any internal examination.
The wires in this mains lead are coloured in accordance with
the following code:
BUS:
asst ue tei hnda dot dese Ducrane
Neutral
BrOWN Sos Sinatra Sect
atts weelatveouts
Live
The wires in this mains lead must be connected to the termi-
nals in the plug as follows:
Wire colour
Plug terminal marking
BIWO>
2032 sastrasit condos deacautai ooadeases
N or Black
BrOWIN: veces nvevtes ters seucvewteeg
th deren L or Red
(>
Brown to
Live
Blue to
Neutral
wv)
Plug
Notes:
1. If a 13-amp plug is used, this must be fitted with a 5-amp
fuse.
2. If a 3-pin plug with earthing contact is used, no wire must
be connected to the E terminal.
Safety precautions
Important!
Units shipped to countries other than the above countries are
equipped with an AC voltage selector switch on the rear panel.
Refer to the following paragraph for the proper setting of this
switch.
AC voltage selection
This unit operates on 110-120 or 220-240 volts AC. The AC
voltage selector switches Type A and Type B on the rear panel are
set to the voltage that prevails in the area to which the unit
is shipped. Before connecting the power cord to your AC out-
let, make sure that the setting position of this switch matches
your line voltage. tf not, it must be set to your voltage in ac-
cordance with the following direction.
Note:
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector
switch.
AC voltage selector switch
Type A
-_- —
Hee TTD
AC110-
q20V ~ AC220V~
AC240V ~
Type B
fo
AC110V- <4 ® AC220V-
120V ~
240V ~
Move switch lever to match your line voltage with
a small screwdriver or other pointed tool.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED ''DANGEROUS VOL-
TAGE' WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN-
STRUCTIONS
IN THE LITERATURE ACCOMPANYING
THE APPLIANCE.
KRX-69
(En)
Werbung
