Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Playback of cassette deck
HTo playback a tape
1 Insert a tape.
EJECT key
==
EJECT key
EJECT key
{Deck A)
(Deck B)
DIRECTION
DOLBY NR
Deck B
switch
switch
operation keys
Deck A
i
y
operation keys
>
S/
C=!
Close securely
by pressing upper inside.
e@ The tape shall be fully rewound to one of the reels before being inserted into the cassette holder.
@ The type of tape, Normal, Chrome or Metal, is detected and set automatically.
2 Determine the playback conditions.
Selection of DIRECTION
mode
Tape stops at the end of one side.
Selection of DOLBY
NR mode
(Loo
])
Tape stops after two side have been played.
DIRECTION
i
Tape playback continues until the [ml] key is pressed.
To stop playback
@ When the DIRECTION switch is set to ~~ or >, the playback
stops automatically at the end of tape.
Note:
Do not press the [4] key except when the tape is stationary.
18 = kRx-69 (En)
Dolby NR (Noise Reduction)
The Dolby NR system minimizes tape noise heard during tape
playback by utilizing the characteristics of tape recording and
playback. The tapes recorded with Dolby NR ON must be played
back with Dolby NR ON.
Werbung
