Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation of remote control unit
Consult the instruction manuals for CD player (DP-49 - DPR-99) or turntable (KD-49F) on how to use CD or turntable
keys. Other keys have the same function as those on the main system.
Transmitter
operation keys
It is impossible
to use with the
DP-49.
Cassette Deck A
operation keys
Tuner
P.SCAN
| TUNER
LES
heen See
ae
ee
KENWOOD"
REMOTE
CONTROL
UNIT
RAC-89
POWER key
MUTE (Muting)
key
MOperation procedure
Plug the power cord of the main system into an AC
wall outlet, and press the POWER
key on the remote
control unit to turn the power on.
When
the power
is turned
on, direct
the
remote
control transmitter toward the tuner and press the
key of the source component to be operated.
@ Components connected via the system control cords, such as
the CD player, can also be remote-controlled. In this case, please
read the instruction manual supplied with your CD player.
Notes:
operation keys
Cassette Deck B
operation keys
Input select
VOLUME CONTOL
DOWN/UP key
MLoading batteries
@ Insert two AAA-size (RO3) batteries
as indicated by the polarity marking.
Operating range
[ee
Approx. 6 m
4
Remote control light sensor
1.The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2.When
the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor.
In such a case. change the system installation position to prevent the malfunction.
12)
kRx69
(En)
Werbung
