Werbung
Verfügbare Sprachen
Verfügbare Sprachen
plete information on LGB power
Replacing the Motor
supplies can be found in the LGB
This should only be done by an
catalog.
LGB authorized mechanic. Replac-
ing the motor requires strict atten-
Replacment
tion to proper assembly. If the me-
50010 (5001)
chanism
is
not
reassembled
properly, the locomotive will oper-
50020 (5002)
ate poorly, and the gearbox may be
damaged.
51020 (5102)
If the motors
or gears
are re-
placed, they must be relubricated
51021 (5102/1)LGBMain-
with
LGB
Gear
Lubricant
(51020). This lubricant is engi-
62201 (2201)
neered to resist high temperature
63120 (2120)
and water. Do not use any other
lubricant!
63218 (2218)
65853 (2085/3)Smoke stack
Replacing the wheel sets,
and wheel brushes (Fig. 5)
68511 (5051/1)Lightbulbs,
First, remove the gearbox bottom
cover
by
removing
the
screws
69104 (2010/4)Traction tires
holding the cover. After removing
Other parts are available from E.
the screws holding the driving rods
P. Lehmann
(only
at
the
locomotive),
the
LGB Authorized
wheel sets, pick-up shoes and
wheel brushes can be replaced.
If
the wheel sets are replaced,
they
must
be
relubricated
with
LGB
Gear Lubricant (51020).
To reassemble,
reattach the driv-
ing rods to the wheel sets. Be
sure to relocate
the rods in their
original position. If the mechan-
ism is not reassembled
properly,
the
locomotive
will
operate
poorly, and the gearbox may be
damaged.
Engine
weight
4135 grams
Length
over buffers
630
mm
Power supply
This model is designed to oper-
ate with a DC power supply of Oto
24 volts.
LGB
locomotives
should
only be operated with LGB trans-
formers and power packs. For this
model,
we
recommend
an LGB
power supply with a power output
of 1 amp or more, for example, the
50100 JUMBO
power pack or the
50060
transformer
and
50070
speed control combination. Com-
parts
LGB Smoke and
Cleaning Fluid
LGB Special
Tool
Kit
LGBGraphite
Lubricant
tenance
Oil
Motor
Commutator
brushes
Pick up shoes
insert, 5 volt
5 volt
Patentwerk,
and
Retailers.
7
Werbung
