User/Maintenance Menu - Quick MILL 1006 ESSENCE Handbuch

User/maintenance menu

1
1. Counters: This field shows the various counters regarding dosing and
maintenance.
2. Start cleaning: Pressing this button starts the cleaning of the coffee group.
To stop the cleaning, switch off then switch on the machine again.
3. Start calibration: Press this button to calibrate the level of the water reservoir
sensor, proceeding as follows:
-Insert the
-Press "Start calibration"; when the display shows the empty reservoir, the
calibration has terminated.
4. Measure unit: Pressing °C or °F it is possible to set the temperature measure
unit of the service boiler and the coffee boiler.
5. Sensor sensitivity: In this field the sensitivity of the water level sensors of the
boilers can be modified. If necessary, modify the setting.
6. Steam setpoint / Coffee setpoint: In these fields the temperature of the
boilers can be set.
7. Filling mode: In this field it is possible to set how the boiler is to be filled
choosing between reservoir and network water.
When there is no "Save settings" button, confirm each modification
touching the display.
empty and completely
116
2
3
4
5
6
7
dry water reservoir