Balluff BTL7-P511-M -P-S32 Serie Betriebsanleitung Seite 41

BTL7-P511 -M _ _ _ _ -P-S32/S115/KA_ _
Micropulse Transducer in a Profile Housing
7
Technical data (continued)
7.5 Dimensions, weights
Housing height 36.8 mm
Nominal length 50...7620 mm
Weight (depends on length) Approx. 1.4 kg/m
Housing material Aluminum
BTL7-...-KA_ _
Cable material PUR
cULus 20549
80°C, 300 V,
internal wiring
Cable temperature –40°C...+90°C
Cable diameter Max. 7 mm
Permissible bending radius
Fixed routing ≥ 35 mm
Movable ≥ 105 mm
7.6 Connection to the evaluation unit
The maximum sampling frequency f
current value is available with each sampling, can be found
in the following graphic:
f in Hz
A,max
Fig. 7-1: Maximum sampling rate depending on the nominal length
www.balluff.com
, at which a new
A,max
The minimum sampling frequency f
Nominal length in mm
is 62,5 Hz.
A,min
(1) 1 magnet
(2) 2 to 16 magnets
english 17