Balluff BTL7-P511-M -P-S32 Serie Betriebsanleitung Seite 31

BTL7-P511 -M _ _ _ _ -P-S32/S115/KA_ _
Micropulse Transducer in a Profile Housing
3
Construction and function
BTL7...-S32
1)
12 72
Groove
~80
Mounting clamps with insulating bushes
and ISO 4762 M5x22 cylinder-head screws,
max. tightening torque 2 Nm
BTL7...-S115
13.8
Fig. 3-1: BTL7... transducer, construction
3.1 Construction
Electrical connection: The electrical connection is made
via a cable or a connector (see Type code breakdown from
page 22).
Housing: Aluminum housing containing the waveguide
and processing electronics.
Magnet: Defines the position to be measured on the
waveguide. Magnets are available in various models and
must be ordered separately (see Accessories starting on
page 18).
Nominal length: To optimally adapt the transducer to the
application, nominal lengths from 50 mm to 7620 mm are
available.
www.balluff.com
Nominal length =
Measuring range
2)
~250 ~250
BTL7... cable
~23
max. 7
1)
73
~80
15
1) Unusable area
2) Not included in scope of delivery
View from above on
BTL7...-S32
2)
Magnet
BTL5-P-3800-2
35
50
68
english 7