Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance and
cleaning
Service life of the product extends
and frequently faced problems
decrease if cleaned at regular
intervals.
Cleaning the detergent drawer
Clean the detergent drawer at
regular intervals (every 4-5 washing
cycles) as shown below in order to
prevent accumulation of powder
detergent in time.
C
Lift the rear part of the
siphon to remove it as
illustrated.
• Press the dotted point on
the siphon in the softener
compartment and pull towards
you until the compartment is
removed from the machine.
C
If more than normal amount
of water and softener
mixture starts to gather in
the softener compartment,
clean the siphon.
• Wash the detergent drawer
and the siphon with plenty of
lukewarm water in a washbasin.
Wear protective gloves or use
an appropriate brush to avoid
touching of the residues in the
drawer with your skin when
cleaning.
• After cleaning, seat the siphon
well in its place and insert the
drawer back.
34
Cleaning the loading
door and the drum
For products with drum cleaning
programme, please see Operating
the product - Programmes.
C
Repeat Drum Cleaning
process in every 2 months.
Use an anti-limescale
suitable for the washing
machines.
After every washing check that no
foreign substance is left in the drum.
If the holes on the bellow shown in
the figure is blocked, open the holes
using a toothpick.
C
Foreign metal substances
will cause rust stains in
the drum. Clean the stains
on the drum surface by
using cleaning agents for
stainless steel. Never use
steel wool or wire wool.
A
WARNING: Never use
sponge or scrub materials.
These will damage the
painted, chrome plated and
plastic surfaces.
Werbung
