Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Open the loading door, place the
laundry and put detergent, etc.
• Select the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
• Set the end time of your choice
by pressing the End Time button.
End Time indicator illuminates.
• Press Start/Pause button.
Countdown starts. ":" sign in the
middle of the end time on the
display starts flashing.
C
Additional laundry may be
loaded during the End Time
countdown period. At the end
of the countdown, End Time
indicator turns off, washing
cycle starts and the time of
the selected programme
appears on the display.
When the End Time
selection is completed, the
time appears on the screen
consists of end time plus
the duration of the selected
programme.
Changing the duration of End Time
Press End Time button. Every time
the button is pressed, the period will
change in 3-hour increments and the
light of the selected End Time will
turn on.
Cancelling the End Time function
If you want to cancel the end time
countdown and start the programme
immediately:
• Set the End Time to zero (delete
all End Time screens) or keep On/
Off button pressed for 3 seconds.
End Time function is cancelled
when the machine is turned off
and on again.
• Then, select the programme you
want to run again.
• Press Start / Pause button to
start the programme.
Starting the programme
• Start the programme with Start/
Pause button.
• Programme follow-up light
showing the startup of the
programme will turn on.
C
If no programme is started
or no key is pressed
within 10 minutes during
programme selection
process, machine will turn
off automatically. Display and
all indicators are turned off.
Information related with the
selected programme will be
displayed when you press On
/ Off button.
Door lock
There is a locking system on the
loading door of the machine that
prevents opening of the loading door
in cases when the water level is
unsuitable.
"Door Locked" light in the panel turns
on when the loading door is locked.
Changes that can be made
after programme has started
Adding laundry after the programme
has started:
Pausing the machine
When this programme is running,
press Start/Pause button to switch
the machine to pause mode. Start/
Pause light and program follow-up
light indicating that the programme
is about to begin start flashing
to indicate that the machine has
switched to pause mode. Also the
Loading Door light will flash until
the loading door is released. When
the Loading Door is ready to be
opened Loading Door light will turn
off, programme step light and Start/
Pause light will continue to flash.
Also, when the loading door is ready
to be opened, Loading Door light will
turn off in addition to the programme
step light.
EN
RO
31
Werbung
