Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quick User Manual
Preparing the machine
• Check if the hoses are connected
tightly.
• Plug in your machine.
• Turn the tap on completely.
• Place the laundry in the machine.
• Add detergent and fabric softener.
Programme selection
• Select the programme suitable
for the type, amount and soiling
level of the laundry in accordance
with the "Programme and
consumption table" and the
temperature table.
Auxiliary function selection
Select the desired auxiliary functions
before starting the programme.
Whenever a programme is selected,
frames of the auxiliary function
symbol that can be selected together
with it illuminates. The inner section
illuminates too when an auxiliary
function is selected.
Starting the programme
• Press Start / Pause button to
start the programme.
• Programme follow-up light
showing the startup of the
programme will turn on.
C
If no programme is started or
no button is pressed within
1 minute during programme
selection process, the machine
will switch to Pause mode
and the illumination level of
the temperature, speed and
loading door indicator lights will
decrease. Other indicator lights
and indicators will turn off.
Once the Programme Selection
knob is rotated or any button
is pressed, indicator lights and
indicators will turn on again.
End of programme
End symbol appears when the
programme is completed.
If you do not press any button for 10
minutes, the machine will switch to
OFF mode. Display and all indicators
are turned off.
Completed programme steps will be
displayed if you press On / Off button.
Cancelling the programme
The programme is cancelled when
the machine is turned off and on
again. Press and hold On / Off button
for 3 seconds.
Child Lock
You can prevent children from
tampering with the machine by using
the Child Lock feature. Thus you
can avoid any changes in a running
programme.
C
You can switch on and off
the machine with On /
Off button when the Child
Lock is active. Programme
resumes when you start the
machine again.
To activate the Child Lock:
Press and hold 2nd Auxiliary
Function button for 3 seconds. "Child
Lock On" appears on the screen after
the countdown on the panel. Release
2nd Auxiliary Function button when
this warning is displayed.
To deactivate the Child Lock:
Press and hold 2nd Auxiliary
Function button for 3 seconds. "Child
Lock On" disappears from the screen
after the countdown on the panel is
over.
EN
RO
33
Werbung
