Cleaning And Disinfection - Pari VORTEX Gebrauchsanweisung

4

CLEANING AND DISINFECTION

Clean the VORTEX
cleaned regularly and immediately after the application, particularly if contamination is
visible.
If the patient suffers from an infectious disease or is in a high risk group (e.g., patients
with cystic fibrosis), ask your doctor or pharmacist about additional recommended
hygiene procedures.
4.1 Preparation
• Remove the connecting ring and, if present, the mask
together with the mask connector as necessary
(do not remove the mouthpiece!).
4.2 Cleaning
• Thoroughly clean all components in warm, drinkable tap water and dishwashing
liquid.
• Rinse all parts thoroughly under warm running water.
• If necessary, use a stream of tap water to push the valve (2a) gently back into its
original position, and then shake to remove excess water.
thoroughly before using it for the first time. The VORTEX
®
– 20 –
must be
®