Additional Functions; 9�1 Inverting The Pan Direction; 9�2 Inverting The Tilt Direction; 9�3 Limiting The Pan Angle - IMG STAGE LINE WASH-42LED Bedienungsanleitung

9 Additional Functions

9.1 Inverting the pan direction
To match the pan direction of the spotlight to,
for example, other jointly controlled spotlights:
1) Press the button MENU repeatedly until the
display indicates
2) Use the button UP or DOWN to define if the
pan direction is to be inverted (
( ) .
3) Press the button ENTER .
9.2 Inverting the tilt direction
To match the tilt direction of the spotlight to,
for example, other jointly controlled spotlights:
1) Press the button MENU repeatedly until the
display indicates
2) Use the button UP or DOWN to define if the
tilt direction is to be inverted (
( ) .
3) Press the button ENTER .
9.3 Limiting the pan angle
Depending on the mounting position and field
of application, it may be reasonable to limit the
pan angle of the spotlight:
1) Press the button MENU repeatedly until the
display indicates
2) Use the button UP or DOWN to select:
: 180° max . pan angle
: 360° max . pan angle
: 540° max . pan angle
3) Press the button ENTER .
16
or .
) or not
or .
) or not
, or .
9.4 Limiting the tilt angle
Depending on the mounting position and field
of application, it may be reasonable to limit the
tilt angle of the spotlight:
1) Press the button MENU repeatedly until the
display indicates
2) Use the button UP or DOWN to select:
: 90° max . tilt angle
: 180° max . tilt angle
3) Press the button ENTER .
9.5 Rotating the display
When the spotlight is suspended, the display
can be rotated by 180° to make sure that it can
be read correctly .
1) Press the button MENU repeatedly until the
display indicates
2) Use the button UP or DOWN to define if the
display is to be rotated (
3) Press the button ENTER .
9.6 Resetting the unit
To have the moving head conduct a reference
move for position adjustment (as after power
switch-on):
1) Press the button MENU repeatedly until the
display indicates
2) Press the button ENTER .
To reset all settings of the WASH-42LED to
the factory settings as well (
icon ��):
1) Press the button MENU repeatedly until the
display indicates
2) Press the button ENTER .
or .
or (or ) .
) or not (
.
☞
chapter 10 .2,
.
) .