Safety Notes; Applications; Installation - IMG STAGE LINE WASH-42LED Bedienungsanleitung

2 Safety Notes

The unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit uses dangerous
mains voltage . Leave servicing
to skilled personnel and do
not insert anything into the
air vents; inexpert handling
may result in electric shock .
•
The unit is suitable for indoor use only . Protect
it against dripping water, splash water and
high air humidity . The admissible ambient
temperature range is 0 – 40 °C .
•
Do not place any vessel with liquid on the unit,
e . g . a drinking glass .
•
The heat generated inside the unit must be
dissipated by air circulation; never cover the
air vents of the housing .
•
Do not operate the unit or immediately dis-
connect the mains plug from the socket
1 . if the unit or the mains cable is visibly dam-
aged,
2 . if a defect might have occurred after the
unit was dropped or suffered a similar ac-
cident,
3 . if malfunctions occur .
In any case the unit must be repaired by skilled
personnel .
•
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug .
•
For cleaning only use a dry, soft cloth; never
use water or chemicals .
•
No guarantee claims for the unit and no li-
ability for any resulting personal damage or
material damage will be accepted if the unit is
used for other purposes than originally intend-
ed, if it is not safely installed or not correctly
connected or operated, or if it is not repaired
in an expert way .
If the unit is to be put out of operation de-
finitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment .

3 Applications

This LED spotlight is used for effect illumina-
tion, e . g . on stage, in discotheques and function
.
rooms . It features a movable head which can
be panned by 540° and tilted by 180° . Seven
extra-bright 10 W RGBW LEDs are used as a light
source . The LEDs are able to radiate coloured
light in the three primary colours (red, green and
blue) as well as white and light created by ad-
ditive mixing . In addition, crossfading between
colours and stroboscope effects is supported .
The spotlight is designed for control via a
DMX light controller (8 or 13 DMX control chan-
nels), but it can also be operated independently
or together with multiple WASH-42LEDs (mas-
ter / slave mode) . In addition, the integrated mi-
crophone provides effects that are in sync with
the music .

4 Installation

•
Always place the spotlight at a location where
sufficient air circulation is ensured during
operation . Never cover the air vents of the
housing .
•
The minimum distance between the spotlight
and the adjoining surfaces must be 15 cm .
Set up the WASH-42LED on a solid and even
surface . It is also possible to install it upside
down on a crossbar, for example . To do so, install
the mounting bracket (9) by means of a stable
mounting screw or a support for lighting units
(C hook), for example, to a crossbar and then, as
shown in figure 3, fasten the mounting bracket
to the base plate, using the two hexagon socket
screws (8) . To additionally secure the unit via a
safety rope, fasten the ring bolt (7) to the base
plate at the indicated position .
WARNING
fasten the safety rope in such a way that the
maximum falling distance of the unit will not
exceed 20 cm] .
Install the spotlight safely and
expertly . When installing it
at a place where people may
walk or sit under it, addition-
ally secure it [e . g . via a safe-
ty rope on the ring bolt (7);
13