Werbung
Verfügbare Sprachen
Verfügbare Sprachen
˜ Initial use
˜ Unpacking
m
WARNING!
The product and the packaging are not
u
children's toys! Children must not play with
plastic bags, sheets and small parts! There
is a danger of choking and suffocation!
1 . Unpack all parts and lay them on a flat,
stable surface .
2 . Remove all packing materials and shipping
devices if applicable .
3 . Make sure the delivery contents are complete
and free of any damage . If you find that parts
are missing or show damage do not use the
product but contact your dealer .
Do not use the product unless missing
parts have been delivered in addition or
defective parts have been replaced . Using an
incomplete or damaged product represents a
hazard to people and property .
4 . Ensure that you have all the accessories and
tools needed for assembly and operation .
This also includes suitable personal protective
equipment .
˜ Accessories
To operate this product safely and correctly, the
following accessories, i . e . tools and attachments,
are necessary:
Suitable personal protective equipment
Accessories and tools are available through
your authorised dealer . When buying always
consider the technical requirements of this product
(see "Technical data") .
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer .
˜ Before use
m
WARNING!
Risk of accident if the machine is operated
u
using electrical power supply that does
not match the specifications shown on the
rating label of the tool .
The mains voltage and the frequency of
u
the power source must correspond with the
specifications on the machine's rating plate .
m
WARNING!
Always switch the product off and
disconnect it from the mains before
performing inspections, installing
accessories or making adjustments!
˜ Fitting the universal stirrer
Screw the shaft
4b ]
[
completely (Fig . B) .
NOTE
You do not need to fix the spiral
u
the shaft
very tightly . The product's
4b ]
[
rotational motion securely tightens shaft
and spiral .
Then screw the assembled universal stirrer
into the agitator shaft
Tighten the universal stirrer
assembly spanners
(Fig . D) .
into the spiral
4a ]
[
to
4a ]
[
completely (Fig . C) .
3 ]
[
firmly by using
4 ]
[
per rotational direction
2 ]
[
GB
4 ]
[
13
Werbung
