Installation - Santec VTC-272WDP/W Bedienungsanleitung

Bedienungsanleitung / User manual VTC-272WDP/W
Items included in the delivery:
1 x camera VTC-272WDP/W
1 x cable adapter BNC socket/plug
1 x user manual

Installation

(also see the pictures on the following pages)
This camera is a colour dome camera. It has been developed for indoor CCTV applications.
You will find the technical data at the end of the manual.
1. Bracket and camera installation
Make sure to fix the camera onto a solid basis which is capable to carry the weight of the
camera. Ensure that the camera is safely installed by using only suitable screws.
2. Power supply and monitor impedance
Only use a stabilised power supply unit with sufficient wattage (see chapter "Specifications"
for recommended power supply). Only approved cables should be used.
The camera can be operated with 12 V DC or 24 V AC.
If a monitor is connected directly, the monitor impedance has to be set to 75 Ohm. Verify the
position of the switch in case the video picture is of poor quality.
Power supply is connected to the open cable ends (red: + / black: -) or unpoled at AC.
The yellow BNC-plug is for video output.
Mitgeliefert wird ein Kabeladapter BNC-Buchse/Sockelstecker, der auf den zusätzlichen
Videoausgang auf der Kameraplatine aufgesteckt werden kann, um z.B. bei der Kamera-
Installation einen Monitor anzuschließen, wenn das normale Anschlusskabel schon verlegt
ist (Bild 2).
3. Camera housing
Open the camera housing by carefully turning it counter-clockwise (see picture 1).
Close the camera housing by carefully turning it clockwise (see picture 1).
Improper handling of the appliance will invalidate the warranty.
_________________________________________________________________________________
- 21 -