2.4
Setting Wheel and Stop for the Sewing Foot Lift Height
2.4.1
Setting Wheel for the Sewing Foot Lift Height
6
12
1
The setting wheel can only be turned so far to the left or right until the
3
stop ring 3 lays onto the respective side of the cam of the lock ring 5.
When the setting wheel is turned fully to the right:
4
–
The smallest value should be shown.
5
–
The setting wheel should have the least play.
Caution Risk of Injury!
Before adjusting turn the main switch off.
–
Remove the tension plate 2.
–
Screw off the "MIN" setting wheel.
–
Reach through the opening behind the tension plate and turn the
worm wheel 1 so that it touches the ball pin.
–
Align the stop ring 3 so that its right side 6 touches the cam 4 of
the catch ring 5.
–
Screw on the setting wheel so that the smallest value is shown.
(White arrow on the setting wheel)
2