3.3.2 Model Selection via Menu
If the model number is not known, all programmed models can be run
through in the following manner.
Order of operations
–
Press the "P" key.
The following display appears :
–
Press the "Y" key.
The first stored program is shown.
Each pressing of the "Y" key shows the next model.
If no models currently exist, the following appears :
If there are no programs in the memory, the following display
appears :
–
If the displayed program is to be selected,
Press the "E" key.
The following display appears.
After approx. 2 seconds the display changes to the step 1.
3
7