Vacuum Pump; General; Safety Advice - probst VPH-100 GREENLINE Betriebsanleitung

Vacuum pump

9 Vacuum pump
9.1

General

This vacuum pump is equipped with a rechargeable 12 Volt 6.5 Ah lead battery, and the pump is powered by an in-
built lead battery.
The recharging control system lets you see how charged up the battery is.
9.2

Safety Advice

•
The voltage must comply with that stated on the vacuum pump data plate. The pump must only be powered by a
12 Volt direct current.
•
Before working on the pump, including changing the supply hose, remove the plug from the socket.
•
The lead wires have to be in perfect condition. Any damaged parts have to be replaced immediately.
•
Only use original spare parts.
•
Do not plug in the pump to the mains if it is raining or damp.
•
When opening covers or removing parts, except for when this can be done by hand, live parts can be exposed.
Connections can also be live.
•
Before carrying out any maintenance work, repairs or replacing any parts, the pump must be disconnected from
all power sources if it needs to be opened.
•
Do not use the pump in rooms or in surroundings in which gases, fumes or dust are present or could be present.
•
Protect the device for wetness and dampness.
Do not use the pump if safe working conditions cannot be guaranteed. It would not be safe to continue if:
•
The pump is clearly damaged.
•
The pump no longer works.
•
It has been stopped for a long period or in unfavourable conditions.
•
It is damaged during transportation.
Never switch the pump on straight away if it is brought in from a cold room to a warm one.
The condensation could damage your pump. Let it come to room temperature without switching it on.
52710008 / 51720009 25 / 28 GB