Kärcher BR 30/4 Bedienungsanleitung Seite 17

Maintenance Works
Replace the vacuum bar.
Note
The vacuum bars are attached to the appli-
ance with snaps and can simply be pulled off.
Move the suction bar lift pedal to posi-
tion „suction off" (Fig. 3 - position "1/
ON", see inside front cover).
Remove the fresh water reservoir.
Remove the dirt water reservoir.
Lay the device on the reverse.
Pull off the vacuum bar downwards.
Insert the new vacuum bars and lock
them into place.
Replacing the brush roller
Remove the fresh water reservoir.
Remove the dirt water reservoir.
Lay the device on the reverse.
Press the release button for the brush
roller and swivel the brush roller toward
the bottom and pull it off the driver.
Place the new brush roller on the driver
and lock into place on the opposite side.
Frost protection
In case of danger of frost:
Empty the fresh and dirt water reser-
voirs.
Store the appliance in a frost-protected
room.
✁ ✄
✂
Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Caution
Risk of damage to the appliance on ac-
count of water leakage. Empty the waste
water reservoir and the fresh water reser-
voir prior to performing maintenance on the
appliance.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
– 5
☎ ✆
Faults