AFRISO EURO-INDEX LAG-14 ER Betriebsanleitung Seite 81

Mounting
EN
5.6 Setting the operating mode
The product is factory-set to the operating mode "Eco".
If you want to operate the product in the operating mode "FailSafe", you
must change the position of the jumper on the PCB.
Verify that the mains voltage is interrupted and cannot be switched on.
1. Open the control unit.
2. Plug the jumper onto the contacts for the operating mode to be set.
A
B
A
A. Operating mode "Eco" B. Operating mode "Failsafe"
3. Close the control unit.
29
LAG-14 ER