AFRISO EURO-INDEX LAG-14 ER Betriebsanleitung Seite 78

5.5 Mounting the control unit
OPERATION IN HAZARDOUS AREA
• Verify that the control unit is only operated non-hazardous areas.
Failure to follow these instructions will result in death or serious injury.
Mount the control unit to the wall (use a mounting type A or B according to
the following description).
 Verify that the control unit is mounted to an even, rigid and dry wall in the
non-hazardous area.
 Verify that the control unit is accessible and easy to oversee at all times.
 Verify that the control unit is protected against water and splash water.
 Verify that the control unit is protected from direct atmospheric influences,
frost and sunlight if it is installed outdoors.
- Use a suitable protective housing protective housing.
 Verify compliance with the permissible ambient conditions for the control
unit.
Fig. 6: Control unit with mounting frame for panel mounting; right: control panel cut out
Mounting
DANGER
LAG-14 ER
EN
26