Herunterladen Diese Seite drucken

VOLTCRAFT 10 07 07 Bedienungsanleitung Seite 14

Digitales handthermometer

Werbung

Applications other than those described above will
result in damage to the product that can be dangerous,
e.g. a short circuit, fire or an electric shock. The product
should not be modified or rebuilt in any way and the
housing should not be opened!
The safety information must be followed at all times!
Safety information
Damage caused through non-observance of these
operating instructions is not covered by the guaran-
tee. We accept no responsibility for any consequen-
tial damages that result!
An exclamation mark within a triangle indicates
important information in the operating instructions.
Before operating the product please read the
instructions.
For safety and licensing reasons (CE) unauthorised rebuilding or
modification of the hand thermometer is not permitted.
Never exceed the maximum input limits.
In commercial facilities, the electrical equipment safety regulations
from the German Federation of Institutions (HVBG) are to be
observed.
Keep away from children.
In case of queries that cannot be answered in these operating
instructions, please contact a specialist or our customer support
service.
14
Maintenance et nettoyage
Nettoyez de temps en temps le boîtier à l´aide d´un chiffon sec. N'u-
tilisez en aucun cas des produits liquides ou des détergents ! Une
maintenance ou une réparation doivent uniquement être effectuées
par un technicien spécialisé.
Retirez les piles de l´appareil en cas de non-utilisation prolongée.
Elimination des éléments usés
Suite à une défectuosité, il convient de procéder au rejet de l'ap-
pareil devenu inutilisable, conformément aux prescriptions légales
en vigueur.
Caractéristiques techniques
Plage de mesure des températures : de -200°C à +1 370°C
Résolution
Tension d´entrée max.
Conditions ambiantes
Service
Stockage
Taux de mesure
Entrées
Alimentation électrique
Dimensions
Poids
: de -200,00°C à +1 370,00°C
: de -200°C à +200°C = 0,1°C
: de +200°C à +1370°C = 1°C
: de -328°F à +200°F = 0,1°F
: de +200°F à +2498°F
= 1°F
: 60V DC ou 24V AC
: de 0°C à +50°C (de 32°F à
122°F); 0–80 % RH
: de -10°c à +60°C (de 14°F à
140°F); 0–80 % RH
: 0,6 mesures par seconde
: 1 (K101); 2 (K102) pour les
thermocouples de type K
: Pile bloc de 9V
: (l x L x p) 164 x 54 x 34 mm
: env. 180g (piles comprises)
31

Werbung

loading

Diese Anleitung auch für:

K102K 10110 07 08