nO
2-
appears. Press
3- Press the key
for 5 seconds.
The device returns to its initial configuration and
goes back automatically to the Auto mode.
Comfort temperature setpoint
Duration of Boost
Keypad lock
User settings
Backlight
Eco reduction level
Frost protection
Comfort low temperature limit
Comfort high temperature limit
Max. Boost duration
Max. Boost temperature
Temperature unit
Installer settings
Open window detection
Optimization function
PIN code protection
PIN code value
Advanced installer settings
Temperature sensor calibration
Radiatorpower
To exit the settings, press
ERROR CODES ON DISPLAY
- Er1: Room temperature sensor defective (interrupted sensor)
- Er2: Room temperature sensor defective (sensor shorted)
- ErE: Error in electronics
20
YES
or
to select
General
19 °C
60 min.
Deactivated
L3
-3,5 °C
7 °C
7 °C
30 °C
60 min.
35 °C
°C
Activated
Option Comfort
Deactvated
0000
0,0
500W
3 times.
.
5 s
BASIC
RF
no
YES
5 s