Open Window Detection - Vasco E-volve Gebrauchs- Und Installationsanweisung

4- The second day (Tuesday) flashes.
Repeat the procedure described above for every
day of the week.
5- Once you have selected a program for each day, confirm your selection by pressing
on the screen with the programs you have set for them. Press
"Auto mode". If no button is pressed for a few minutes, the controller automatically returns to "Auto Mode".
VIEW OF THE PROGRAMMED WEEK PROGRAM
From Auto, Comfort, Eco or Frost protection mode, press
of the week (Comfort, Eco, P1, P2 or P3) will scroll on display in front of you.
To exit the programme viewing mode, press
TEMPORARILY OVERWRITE THE WEEK PROGRAM
This function allows you to change the setting temperature temporarily until thenext scheduled change in temperature or
the transition to 0:00.
Example:
1- The controller is in Auto mode, the running
programme is Eco 15,5°C.
2- By pressing or , you can change
temporarily the desired temperature up to 18°C
for example.
3- This change will be automatically cancelled at the
next change of programme or transition to 0:00.

OPEN WINDOW DETECTION

The open window detection is sensitive to temperature fluctuations. The controller responds to open windows according
to various parameters: temperature setting, rise and fall of the room temperature, outside temperature, location of the
radiator, etc. If the controller is close to a front door, the detection air can be disturbed opening the door. If this is a
problem, we recommend you disable the open window detection (see installer settings).
When the controller proceeds to a temperature reduction cycle (frost protection mode) by opening a window, a frost
protection counter appears on the display to show the cycle duration. The counter is automatically reset to zero the next
time the Frost Protection is switched on. By pressing a button, the frost protection mode is deactivated.
Note: if a temperature rise is detected, the controller will automatically return to the previous mode.
1
twice to exit programming mode and return to
. for 5 seconds. Press
twice.
3
3 3
3
P1
2
. The days of the week appear
twice, the programme for each day
EN
11