Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OVERVIEW OF THE PROGRAMS
Comfort
Your device's default setting is non-stop Comfort for 7 days a week.
- Comfort: the controller will operate in Comfort mode, 24 hours a day, as regards each day selected.
- Eco: the controller will operate 24 hours a day in Eco mode.
Note: You can set the temperature-lowering parameters, see user settings.
- P1: the controller will operate in Comfort mode for 1 time block eg: from 06:00 to 22:00 (and in Eco mode from 22:00 to 06:00).
- P2: the controller will operate in Comfort mode for 2 time blocks eg: from 06:00 to 09:00 and from 16:00 to 22:00 (and in
Eco mode from 09:00 to 16:00 and from 22:00 to 06:00).
- P3: the controller will operate in Comfort mode for 3 time blocks eg: from 06:00 to 08:00, from 12:00 to 14:00 and from
18:00 to 23:00 (and in Eco mode from 23:00 to 06:00, from 08:00 to 12:00 and from 14:00 to 18:00).
Note: If the standard times of P1, P2 and P3 do not suit you, you can change them, but then this time
applies to all days of the week on which P1, P2 or P3 is set.
SET A WEEK PROGRAM
1- From Auto, Comfort, Eco or Frost protection
mode, press
for 5 seconds.
When the cursor moves over the time setting
symbol
, briefly press
2- Press
or
to set the week program.
3- Select the desired program with
If desired, the standard times can be adjusted:
press
for at least 5 seconds.
If the standard times apply: press
next day (go to step 4).
3.1- The start time flashes and with
you can change this time at 30 minute intervals.
Press
to save.
3.2- The end time flashes and with
you can change this time at 30 minute intervals.
Press
to save.
10
Eco
P1
.
or
.
to set the
or
or
P2
1
2
1
5 s
1
2
1
2
P3
ConF
ConF
ConF
ConF
ConF
ConF
2
1
5 s
.
06 . 30
06 . 30
06 . 30
1
.
22 . 30
22 . 30
22 . 30
1
2
2
Werbung
Inhaltsverzeichnis
