Backrest Extension; Lumbar Support - Ransomes Parkway 2250 Plus Bedienungsanleitung Und Wartungsanleitung

9 ADJUSTMENTS

BACKREST EXTENSION

The backrest extension can be individually adjusted
by pulling it upwards or pushing it downwards over
the various locking increments up the end stop.
To remove the backrest extension, pull it upwards
over the end stop.

LUMBAR SUPPORT

The lumbar support increases both the seating
comfort and the performance of the driver.
By turning the adjustment knob upwards, the
curvature in the upper part of the backrest cushion
can be adjusted. By turning the knob downwards,
the curvature in the lower part of the backrest
cushion can be adjusted.
0 = No curvature
1 = Max. curvature at the top
2 = Max. curvature at the bottom
ARMRESTS
The armrests can be folded up if required and the
height individually adjusted.
To adjust the armrests for height, separate the
round cap (see arrow) from the cover, loosen the
hexagon nut (size 13 mm) behind it and adjust the
armrests to the desired position (5-steps) and
tighten the nut again.
Replace the cap onto the nut.
en-48
RANSOMES PARKWAY 2250 PLUS
SAFETY AND OPERATORS MANUAL