Technical Data; Liability For Material Defects And Warranty - SQlab 810 3.0 Bedienungsanleitung

Caution
Incorrect cleaning
Damage to the stem
•
Do not use a high-pressure cleaner.
•
Avoid solvent-containing or aggressive cleaning agents such as acetone, nitro (thinner), cleaning gasoline or
trichloroethylene.
Noises such as creaking, cracking, squeaking are undesirable. The cause is usually difficult to find out. The most common source on the
handlebar is the handlebar clamp.
Note
Make absolutely sure that the clamping surfaces of the stem and the clamping area of the handlebars are free of dirt.

Technical Data

Item
Designation
number
SQlab 810 2937/2938
3.0 /2939
SQlab 802 2940/2941
3.0 /2942
SQlab 821 2943/2944
3.0 /2945

Liability for Material Defects and Warranty

Within the EU, the statutory liability for material defects applies to all sales contracts between private individuals and commercial
sellers. From the date of purchase, buyers have 2 years warranty rights. In the event of a defect occurring or a warranty request, the
SQlab partner from whom you purchased the product is your contact.
Note
This regulation is only valid in European countries. Ask your SQlab dealer about any deviating regulations in your country.
The following specialist dealer warranty is in addition to the statutory liability for material defects of your contractual partner and does
not affect it.
In addition to the statutory liability for material defects, SQlab GmbH extends the manufacturer's warranty from 24 to 36 months for
products purchased from specialist dealers in Germany.
In the event of a defect occurring or a warranty inquiry, your SQlab specialist dealer is the contact.
The following end customer warranty is in addition to the statutory liability for material defects of your contract partner and does not
affect it.
For irreparable damage to your SQlab product caused by a fall, SQlab GmbH offers you a discount of 50% up to 10 years after the date
of purchase when buying a new SQlab replacement product.
If you want to take advantage of the Crash Replacement, send us your defective product to the following address:
Weight (g) Rise (mm)
from 246 24/31/38
from 234 40/52/63
Max.
from 408
70/90/110
Clamp
Reach (mm) diameter
(mm)
66/85/103 31,8
57/74/90 31,8
Max.
31,8
70/90/110
Clamp
diameter Max. torque
steerer tube (Nm)
(mm)
28,6 8
28,6 8
28,6 8
Material
Aluminium
Aluminium
Aluminium