Storch Airless-Mastic Bedienungsanleitung Seite 53

Component identification
Operation
System requirements
NOTE: have the wallet-sized warning card provided with this gun and the operator available at all times.
The card contains important treatment information should an injection injury occur. Additional cards are
available at no charge.
1. The pressure relief valve assists in relieving fluid pressure in the displacement pump, hose and gun; triggering the
gun to relieve pressure may not be sufficient.
2. Filter the fluid you are spraying if it contains particles which could clog up the spray nozzle.
Earthing the system
To reduce the risk of static sparks, earth the pump and all other equipment used or located in the work area.
Check your local electrical code for detailed earthing instructions for your area and type of equipment. Also
follow the earthing instructions provided in your pump or sprayer manual. The gun is earthed by a connection
to a properly earthed fluid hose and pump or sprayer. Also read the FIRE OR EXPLOSION HAZARD section.
A. Nozzle holder
B Trigger lock
C Trigger
D Reversible nozzle
E
Airless hose connection
53