Storch Airless-Mastic Bedienungsanleitung Seite 52

EQUIPMENT MISUSE HAZARD
Misuse can cause death or serious injury.
Do not exceed the maximum working pressure or temperature of the lowest rated system component. See technical
data in all equipment manuals.
Use fluids and solvents that are compatible with wetted parts of the equipment. See technical data in all equipment
manuals. Read fluid and solvent manufacturers' warnings. For complete information about your material, request
MSDS from distributor or retailer.
Check equipment daily. Repair or replace worn or damaged parts immediately with genuine replacement parts only.
Do not alter or modify equipment.
Use equipment only for its intended purpose. Call your distributor for information.
Route hoses and cables away from busy areas, sharp edges, moving parts, and hot surfaces.
Do not kink or over-bend hoses or use hoses to pull equipment.
Keep children and animals away from the work area.
Do not operate the unit when suffering from fatigue or under the influence of drugs or alcohol.
Comply with all applicable safety regulations.
PRESSURIZED ALUMINIUM PARTS HAZARD
Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids conta-
ining such solvents in pressurized aluminium equipment. Such use can cause serious chemical reactions and
equipment rupture, and may result in death, serious injury, and property damage.
PERSONAL PROTECTIVE EQUIPMENT
You must wear appropriate protective equipment when operating, servicing or when in the operating area of
the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns,
and hearing loss. This equipment includes but is not limited to:
Protective goggles, clothing and respiratory protection as recommended by the fluid and solvent manu-
facturer, gloves, ear defenders.
52