Heidolph Safe Aufbauanleitung Seite 17

General notes
Reasonably foreseeable misuse
Additional measures may be necessary for use under conditions or for purposes deviating
from the intended use, and/or specific guidelines and safety regulations must be observed.
Compliance with and implementation of all relevant directives and safety measures for the
respective field of application is the sole responsibility of the operator.
All risks resulting from improper use are borne solely by the operator.
The product may only be operated by authorized and instructed personnel. Training and
qualification of the operating personnel as well as ensuring that the product is operated with
responsibility are the sole responsibility of the operator!
General safety instructions
Before commissioning and using the product, familiarize yourself with all the safety regula-
tions and occupational safety guidelines applicable at the place of use and observe them at all
times.
Only operate the product if it is in faultless technical condition.
If there is missing or misleading information on the product or on occupational safety, contact
the responsible safety specialist.
Only use the product as intended and rectify malfunctions or faults on the product immediately.
California Residents
Important information for California residents regarding Prop 65. Please visit www.
P65Warnings.ca.gov for more information
Other regulations
In addition to the notes and instructions in this document, observe all other applicable
regulations such as laboratory and workplace guidelines, hazardous substances ordinances,
recognized rules of safety engineering and occupational medicine as well as particular local
regulations!
Noncompliance will invalidate any warranty claims against Heidolph
Instruments.
The operator is solely liable for all damage resulting from unauthorized
changes or modifications to the device, from the use of unauthorized or
non-genuine spare parts and accessories, or from disregarding the safety
instructions and hazard warnings or the manufacturer's instructions!
Residual risk
The product has been designed and manufactured in accordance with the state-of-the-art stan-
dards and the recognized safety regulations at the time of the development. During mounting
and use, as well as during maintenance, repair and cleaning work, there are nevertheless
certain residual risks associated with the described device.
These are identified and described at the appropriate points in this document.
17