walser Instarter Loop Clip Micro Wireless Kit3-3.5 Gebrauchsanleitung Seite 33

Problem
Too much ambient
noise is being picked
up
Noise from the user
is audible
10. Technical Data
Instarter Loop Clip Micro Wireless Kit3 - 3.5
Article number
Type
Range
Transmission type
Frequency range
Frequency response
Frequency stability
Polar pattern
Number of channels
Noise reduction
Connection type
Battery life
32
Possible causes
Noise reduction is
not activated
Microphone is not
well positioned
Microphone is not
well positioned
23268
Wireless microphone system with two
transmitters and one receiver
50 m
2.4 GHz
2,400 - 2,483.5 MHz
50 - 15,000 Hz
< ± 15 ppm
Omnidirectional, 360°
20
Active through DSP chip
3.5 mm jack plug, 6.5 mm jack plug (adapter),
USB-C (PC / Mac)
Transmitter 15 h, receiver 10 h
Remedy
Activate noise reduction
Find a better location for
the microphone
Find another place for
the microphone or use
a wind shield