Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
Clean the transmitter, receiver, holder, adapter and cables with a soft,
lint-free, damp cloth (e.g., microfibre cloth).
3.
Allow the parts to dry completely before packing or using them.
4.
Let any dirt on the bag or wind shield dry first, then brush it out carefully
with a brush that is not too hard. Wash off aggressive dirt under running
water and then let the parts dry completely.
9.
Troubleshooting
Problem
No sound is
recorded
Possible causes
Wrong connection
cable selected
Cable is incorrectly
connected
Transmitter and
receiver are not
switched on or not
paired.
Mute is activated or
the volume is too low.
The distance
between transmitter
and receiver is too
great or is blocked
by obstacles.
Remedy
Select the correct
connection cable, check
all connections including
those of the camera or
smartphone.
Select the correct socket
on the transmitter/
receiver and check other
cabling.
Switch on transmitter
and receiver and pair if
necessary.
Deactivate mute or
increase volume
Reduce distance
EN
31
Werbung
