Herunterladen Diese Seite drucken

walser Instarter Loop Clip Micro Wireless Kit3-3.5 Gebrauchsanleitung Seite 26

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4
3.5 mm TRRS to TRRS output cable, for smartphone, tablet, ...
5
3.5 mm TRRS to TRS output cable, for cameras, camcorders, ...
6
Lavalier microphone
7
Smartphone holder with lower (7d) and upper holder (7c), shoe (7b)
and locking button (7a)
8
USB-A plug (8a) with multi-USB-C plug (8b) for charging and for
PC / Mac
9
Storage bag
10
Hot shoe adapter with clip shoe (10a) and camera shoe (10b)
11
Fur wind shield
Displays
A
Transmitter
6.
Commissioning
6.1 Switching the transmitter on and off
1.
Press and hold the button
→ The transmitter is switched on.
2.
Press and hold the button
→ The transmitter is switched off.
6.2 Carry out a reset
1.
Switch on the transmitter (1).
2.
While the transmitter (1) is powering up, press and hold the button
(1c) for 3 seconds to carry out a reset.
→ The icon
(1d) for 3 seconds.
(1d) again for 3 seconds.
(connects) is shown in the display.
+ 15
Receiver
A + 15 B + 15
25
EN

Werbung

loading

Verwandte Produkte für walser Instarter Loop Clip Micro Wireless Kit3-3.5