Herunterladen Diese Seite drucken

walser Instarter Loop Clip Micro Wireless Kit3-3.5 Gebrauchsanleitung Seite 23

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

■ Avoid proximity to magnets.
■ The microphone system gets warm during use. Do not cover it and
always allow it to cool down before packing it away.
■ Do not use damaged cables, accessories, transmitters or receivers.
■ Do not modify, open or repair the microphone system. If something is
damaged or defective, have it repaired only by a qualified electrician.
■ Transport the microphone system and its accessories in the original
packaging or the accompanying bag.
■ Store the microphone system and its accessories in a cool, dry and
dust-free location.
The transmitter and receiver each contain at least one rechargeable
battery. You cannot exchange the battery yourself.
■ Protect the microphone system from open flames and high heat.
■ Do not store or charge the parts in small, closed rooms with direct
sunlight or high temperatures.
■ Do not leave the parts unattended while charging them..
■ Do not charge with a damaged charger or cable.
■ After charging has been completed, disconnect the charging cable
from the mains.
■ If you have not used the microphone system for a long time,
first fully charge the batteries before using them again.
■ To prolong your batteries' life, charge them every three months.
22

Werbung

loading

Verwandte Produkte für walser Instarter Loop Clip Micro Wireless Kit3-3.5