OHAUS 3000-Serie Bedienungsanleitung Seite 189

3000 Series Indicators
8.4 Compliance
Compliance to the following standards is indicated by the corresponding mark on the product.
Marking Standard
This product conforms to the EMC directive 2004/108/EC, the Low Voltage Directive 2006/95/EC and the
Non-automatic Weighing Instruments Directive 2009/23/EC. The complete Declaration of Conformity is
available online at www.ohaus.com.
AS/NZS4251.1 Emission, AS/NZS4252.1 Immunity
CAN/CSA-C22.2 No. 61010-1-04, UL Std. No. 61010A-1
MC 173467
EC Emissions Note
This device complies with EN55011/CISPR 11 Class B Group 1.
Important notice for verified weighing instruments
Weighing Instruments verified at the place of manufacture bear one of the preceding mark on the packing
label and the green 'M' (metrology) sticker on the descriptive plate. They may be put into service immediately.
Weighing Instruments to be verified in two stages have no green 'M' (metrology) on the descriptive plate and
bear one of the preceding identification mark on the packing label. The second stage of the initial verification
must be carried out by the approved service organization of the authorized representative within the EC or by
the national weight & measures (W+M) authorities.
The first stage of the initial verification has been carried out at the manufacturers work. It comprises all tests
according to the adopted European standard EN 45501:1992, paragraph 8.2.2.
If national regulations limit the validity period of the verification, the user of the weighing instrument must
strictly observe the re-verification period and inform the respective W+M authorities.
EN-43