OHAUS 3000-Serie Bedienungsanleitung Seite 180

EN-34
5 SERIAL COMMUNICATION
The setup of RS232 operating parameters are fully explained in Section 3.8. The physical hardware connection is explained
in in Section 2.2.
The interface enables display data to be sent to a computer or printer. A computer can be used to control some functions of
the indicator using the commands listed in Table 5-1.
5.1 Interface Commands
Communicate to the indicator using the command characters listed in Table 5-1.
Command
Character
IP
P
CP
SP
xP
Z
T
xT
PU
xU
PV
Esc R
NOTES:
• Commands sent to the Indicator must be terminated with a carriage return (CR) or carriage return-line feed (CRLF).
• Data output by the Indicator is always terminated with a carriage return-line feed (CRLF).
• The xT (preset tare) command is not available when LFT is set to ON.
TABLE 5-1. SERIAL INTERFACE COMMAND TABLE.
Function
Immediate Print of displayed weight (stable or unstable).
Print stable displayed weight (according to stability setting).
Continuous Print.
Print when stable.
Interval Print x = Print Interval (1-3600 sec)
Same as pressing Zero button
Same as pressing Tare button
Download Tare value in grams (positive values only). Sending 0T clears tare (if allowed)
Print current unit: g, kg, lb, oz, lb:oz
Set scale to unit x: 1=g, 2=kg, 3=lb, 4=oz, 5=lb:oz
Version: print name, software revision and LFT ON (if LFT is set ON).
Global reset to reset all menu settings to the original factory defaults
3000 Series Indicators