OHAUS 3000-Serie Bedienungsanleitung Seite 178

EN-32
Editing the Over Setting
The display shows SEt.HI.
Press the Yes button to edit the Over setting.
Settings:
-99999 to 999999
Refer to Menu Navigation Section 3.2 to enter settings.
Begin Check Weighing
The appropriate Under, Accept or Over LED lights to indicate Check Weigh status.
Place a sample on the scale and read the weight.
For loads less than the Under Limit, the yellow Under LED is lit.
For loads greater than the Under Limit and less than the Over limit, the green Accept LED is lit.
For loads greater than the Over Limit, the red Over LED is lit.
3000 Series Indicators