OHAUS 3000-Serie Bedienungsanleitung Seite 166

EN-20
3.4.5 Graduation
Set the scale readability.
0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20.
NOTE: Not all settings are available for each capacity. Refer to the Setup Table 3.3 for available settings.
3.4.6 Power On Unit
Set the unit of measure displayed at startup.
Auto = last unit in use when the indicator was turned off.
Unit kg = kilograms
Unit lb = pounds
Unit g = grams
Unit oz = ounces
3.4.7 Zero Range
Set the percentage of scale capacity that may be zeroed.
0-2 = zero up to 2 percent of capacity
0-100 = zero up to full capacity
3.4.8 Retain Zero Data
Set the retain zero data status.
OFF = disabled
ON = when power is turned on, the displayed weight is based on the last
stored zero.
3.4.9 End Setup
Advance to the next menu.
3000 Series Indicators
•
•
•