OHAUS 3000-Serie Bedienungsanleitung Seite 169

3000 Series Indicators
3.6 Mode Menu
Enter this menu to activate the desired application modes.
3.6.1 Reset
Set the Mode menu to the factory defaults.
No = not reset.
Yes = reset.
3.6.2 Parts Counting Mode
Set the status.
OFF = Disabled
ON = Enabled
3.6.3 Dynamic Mode
Set the status.
OFF = Disabled
ON = MAN (...）
3.6.4 Checkweigh Mode
Set the status.
OFF = Disabled
ON = Enabled
3.6.5 Totalize Mode
Set the status.
OFF = Disabled
ON = Enabled
3.6.6 End Mode
Advance to the next menu.
No, Yes
Reset
Count Off, On
Off, On
Check Off, On
Off, On
Totalize
End Mode Exit MODE menu
EN-23