Herunterladen Diese Seite drucken

Beko BHCB96641BBBHS Bedienungsanleitung Seite 7

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• When you need to transport
the product, wrap it with
bubble wrap packaging mater-
ial or thick cardboard and tape
it tightly. Secure the moving
parts of the product firmly to
prevent damage.
• Before the product is installed,
check the product for any dam-
age after transport. Contact
the importer or the authorized
service centre if damaged.
1.5
Installation Safety
• To have your product ready for
use, first provide the place of
installation and have the elec-
trical installation made. Always
have the installation made by
the manufacturer, the author-
ised service or a person that
the importer company shall
designate.
• To have your product ready for
use, first provide the place of
installation and have the elec-
trical installation made. Then,
call the Authorised Service to
have the installation per-
formed. After installation by
the authorized service, the war-
ranty period begins.
• Before beginning the installa-
tion, de-energize the power line
to which the product will be
connected by turning off the
fuse.
• Always wear protective gloves
during transport and installa-
tion. Otherwise there is a risk
of injury from sharp edges!
• Before the product is installed,
check the product for any dam-
age. Do not have it installed if
the product is damaged.
• Avoid using any heat-insulating
materials to cover the interior
of the furniture that will be in-
stalled.
• Direct sunlight and heat
sources, such as electric or
gas heaters, must not be
present in the area where the
product is installed.
• If there is a socket behind the
place where the product will be
installed, it must be ensured
that the product does not
come into contact with the
socket nor with the plug
plugged into the socket.
• For usage with chimney con-
nections, have qualified indi-
viduals assess the suitability
of the chimney to which the
product will be connected.
• Height between the bottom
surface of your hood and the
top surface of the hob should
be no less than 650 mm. Oth-
erwise, your product will be af-
fected by the heat or flame of
the hob and pose a safety haz-
ard.
EN / 7
EN
DE
FR
NL

Werbung

loading