Beurer Antelope Evolution Gebrauchsanweisung Seite 41

Plus & minus button
Decrease intensity:
Briefl y pressing the minus button decreases the in-
tensity of all electrode pairs by one intensity point.
If you press and hold the button, the intensity is
immediately decreased by 3 intensity points. If you
want to control individual electrodes, please select
them in the app.
Increase intensity:
Briefl y pressing the plus button increases the in-
tensity of all electrode pairs by one intensity point.
If you press and hold the button, the intensity is
immediately increased by 3 intensity points. If you
want to control individual electrodes, please select
them in the app.
Favourite button
Start favourite program:
To start your favourite program, briefl y press the
lightning button on the Booster once.
The LED ring will now start to pulse. This indicates
that the program has been activated.
You now have two starting options:
1. Start at 0%: to do so, press the plus button on
the Booster to set the desired intensity yourself.
2. Start with memory intensity: to do so, press the
favourite button again. The Booster will now
slowly ramp up to the saved values. You can set
the speed with the increase assistant.
Stop memory intensity:
Important note: while the Booster is
ramping up to your memory intensity,
you can stop the process at any time
with the minus button. The intensity
then remains at this setting.
To set a favourite program in the app, see chapter "Select favourite program".
41
3 seconds
3 seconds