Resuming Training - Beurer Antelope Evolution Gebrauchsanweisung

Booster buttons
The power button:
Switching on the device:
Press and hold the
power button until the
LED ring has gradually
lit up clockwise 2x. The
LED ring then lights
up blue.
Switching off the device:
Press and hold the
power button until the
LED ring has gradually
lit up anti-clockwise
2x. During this time,
it lights up green. The
LED light will then be
off .
Pausing training:
Briefl y press the power
button to pause a
current program.

Resuming training:

Briefl y press the power
button to resume a
training session after
a break.
Cancelling an ongoing training session:
1. Pause the current
program by briefl y
pressing the power
button. The LED
ring will start to
pulse.
2. Then press and
hold the power but-
ton until the LED
ring has gradually
lit up anti-clockwise
1x in green.
The light will stop at
"12 o' c lock" and light up
intermittently.
The Booster is now
ready. You can connect
it via Bluetooth.
When the Booster is off
and disconnected from
the power supply, no
lights should be lit up
anymore.
The LED ring lights up
intermittently.
The LED ring will now
light up again to match
the program.
The LED display will
remain at "12 o' c lock".
1x
40