Werbung
Verfügbare Sprachen
Verfügbare Sprachen
APP user guide
• By installing the "Zoef Robot Smart" APP, you can use your smartphone
Notes
to perform various functions.
• For detailed instructions on how to use smart APP, please refer to the
attached APP User Guide.
Specified-cleaning area/Fixed-point
cleaning
With this APP, you can set the range and location
of the area to be cleaned as well as one or more
areas, and it will clean according to the set areas.
Fixed-point cleaning
Scheduled cleaning
If you use the APP to schedule the cleaning time,
the cleaning will automatically start at the
specified time. After cleaning, the robot vacuum
cleaner goes to the charging dock to start
charging.
Scheduled cleaning
Suction setting
You can use this APP to control water quantity
and suction. Each can be adjusted in three
options.
-��-
-��-
-��-
-��-
Suction power
Water control
-��-
control
-��-
-15-
-��-
-��-
Set no-cleaning area/virtual wall
You can use the APP to set the no-cleaning area,
and you can set one or many no-cleaning areas.
The robot vacuum cleaner does not clean the set
no-cleaning area and only clean other areas.
Set no-cleaning area
Do Not Disturb mode
When you activate "Do Not Disturb" mode, the
robot vacuum cleaner will not automatically
clean or play voice guidance. You can use this
APP to turn "Do Not Disturb" mode on or off.
Do Not Disturb
Y-shaped mop
mode
Open the main
interface of the APP,
click "Settings" and
turn on the "Y-shaped
mop" switch, and the
machine will start to
mop the floor in the
"Y-shaped" path.
• Before cleaning the product, be sure to turn off the power supply to
prevent malfunction and electric shock.
Notes
• If the 2-in-1 water tank/dust collector is full of dust or the filter is mixed
with impurities, the suction may be weakened.
• Please clean with water and completely remove the moisture before
using the 2-in-1 water tank/dust collector.
Press the button in the center of
the 2-in-1 water tank/dust
collector to separate it from the
main machine.
Open the 2-in-1 water tank/dust
collector and take out the filter
screen, filter sponge and
pre-filter.
After emptying the 2-in-1 water
tank/dust collector, please rinse
it with water and then dry it
before use.
• All kinds of filter and HEPA can
be cleaned with water. Please
use it after it is completely dried.
Product cleaning and maintenance
2-in-1 water tank/dust colletor
-��-
-��-
-��-
-16-
-��-
-��-
-��-
-��-
-��-
Werbung
