Werbung
Verfügbare Sprachen
Verfügbare Sprachen
How to use/remove the water tank and mop
• The excess water of mop may affect the operation of robot vacuum
cleaner, please squeeze and dry it before use.
Notes
• The mop may have the problem of color shift due to the nature of the
fabric. Please keep it clean and dry after use.
-��-
2-in-1 water tank/dust collector
-��-
-��-
-11-
-�-
-�-
Open the water inlet of the water tank,
fill it with water, and then cover the
rubber plug.
• Fix the mop with hook and loop
fastener on the bottom of the
2-in-1 water tank/dust collector
• • If the rubber plug is not properly
plugged, it may leak water. In
addition, it is recommended to
wet the mop with water, and then
squeeze it hard before use.
How to use/remove the water tank and mop
• If the water stays in the 2-in-1 water tank/dust collector for a long time, it
may be polluted and give off peculiar smell.
Notes
• After cleaning the 2-in-1 water tank/dust collector, empty the remaining
water, and then open the rubber plug to dry.
When installing the 2-in-1 water tank/dust collector, put it into the product
body and slide horizontally until it clicks.
After cleaning, press the button in the center of the 2-in-1 water tank/dust
collector to separate it from the body, and then pour out the remaining
water. After that, remove the mop and clean the mop and 2-in-1 water
tank/dust
-��-
-��-
-��-
-��-
-��-
-12-
-��-
-��-
Werbung
