Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product cleaning and maintenance
• Do not use detergent for cleaning. Please be sure to clean with clean water.
• We recommend that every time you use the 2-in-1 water tank/dust collector
Notes
when you are not at home, empty the dust collector and clean it with water.
If the shape of the filter screen is deformed or does not match the filter
screen cover, please replace it.
• If the filter is washed with water, please dry it in a well-ventilated shade for
at least 24 hours, because it may give off peculiar smell if the water is not
After disassembling the filter,
filter sponge and pre-filter,
please clean it with running
water and make it completely
dry.
• Please clean the filter, filter
sponge and pre-filter after
long-term use.
• The cleaning cycle of the filter
is usually 2 weeks, and the
cleaning life of the filter is about
50 times.
Clean or replace each part, if necessary.
Unit
Recommended cleaning cycle
Filter
Two weeks
Main brush
After prolonged use
After prolonged use
Side brush
-��-
-��-
-��-
-��-
The 2-in-1 water tank/dust collector and water tank are
-��-
semi-permanent.
-��-
-17-
-��-
After the separated filter, filter
sponge and pre-filter are
assembled into the 2-in-1 water
tank/dust collector, push them
horizontally until they are
clamped into the machine body.
• Make sure that the filter is
completely dry before turning it
into the 2-in-1 water tank/dust
collector.
Recommended
replacement cycle
6 months
6 months
3-6 months
• If the water stays in the 2-in-1 water tank/dust collector for a long time,
Notes
the water may be polluted and may give off peculiar smell.
• After cleaning the 2-in-1 water tank/dust collector, please empty the
remaining water and open the rubber plug to remove the water.
Clean the main brush
Main brush cover
Main brush
Remove the main brush cover on the
back of the machine.
If there is any foreign matter on the
suction port or the main brush,
please use a cleaning brush to
remove it. (The main brush can be
washed with water. After washing
with water, please completely remove
water before use. )
Product cleaning and maintenance
Clean the side brushes
Remove the side brushes installed on
both sides of the back of the machine.
Clean all foreign matters with a cleaning
brush and wipe it with a clean cloth.
(The side brushes can also be washed
with water. After washing with water,
please completely remove the water
before use. )
-��-
-��-
-��-
-��-
-��-
-��-
-18-
-��-
-��-
Werbung
